Skip to content
Class 31 Lokpilot DCC Decoder

Class 31 Lokpilot DCC Decoder

SKU ACC2233
€35,95 - €35,95
€35,95
€35,95 - €35,95
€35,95
Availability:
in stock, ready to be shipped

Class 31 Lokpilot DCC Decoder

LokPilot DCC Decoder (No Sound)

Custom programmed for accurascale Class 31 locomotives, to take advantage of all features of the locomotive. 

Common Features:

  • The LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set.

    Features

    We know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.

    Motor control

    The engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.

    Operational safety

    A PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections and is included in all accurascale locos as standard

    Protection

    Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.


Customer Reviews

Based on 18 reviews
100%
(18)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Simon B.
Class 31

Decoder working well so far. I have purchased other Lokpilot decoders that have packed up after a short while, so here's hoping this is a good one.

D
Danny I.
Class 31 lokpilot decoder

These decoders I purchase from accurascale are absolutely perfect and faultless I highly recommend them to use in all accurascale locos, very easy to install and the functions very clear and simple, well done accurascale for using and recommending ESU

M
Mr J.A.
Dcc chip

As advised via internet chip works the fan it is worth saying this in the paperwork with the loco as I bought 6 function chips which did not work the fans my only ever critics of accurscale

J
James M.
Superb quality & easy to use as always!

Really pleased with the decoder, simple plug & play and all the lights work as they should at the touch of a button, plus great speed control from the start, nice and user friendly!

B
Bruce P.
31 Decoder

Perfect. 31 runs great

G
Graham
Class 31 decoder

I chose to remove the loco body to fit the decoder as it was easier to remove than the roof panel! Nevertheless a simple task and the decoder was a breeze to fit. It works perfectly as expected. Another great Accurascale product!

S
Steven M.
⭐️⭐️⭐️⭐️⭐️

Great little decoder, icing on the cake for the 31s

L
Lee M.
Class 31 ESU Decoder

Easy upgrade to DCC.

R
Robert T.
Brush 2 decoder.

Waiting for my loco to stick this in - expected to be the same high quality as my previous decoder purchases.

G
Gareth R.
Accurascale reward points purchase

After receiving an email to say my points were about to expire I decided to purchase the decoder and crew deal. I finally got to round fitting it today. With a couple of CVs adjusted the loco runs superbly and will crawl along without stalling.

12