Skip to content
Andrew Barclay and SECR P Class Lokpilot DCC Decoder

Andrew Barclay and SECR P Class Lokpilot DCC Decoder

SKU ACC2123
£29.12 - £29.12
£29.12
£29.12 - £29.12
£29.12
Availability:
in stock, ready to be shipped

Clas 31 Lokpilot DCC Decoder

Dì-chòdachadh LokPilot DCC (Gun fhuaim)

Custom air a phrògramadh airson ocomotives clas 37 l cruinn, gus brath a ghabhail air a h-uile feart den locomotaibh.

Feartan cumanta:

  • Faodar an decoder LokPilot 5 a chleachdadh air rathaidean-iarainn analog DC agus AC. Bidh an decoder ag atharrachadh eadar na modhan obrachaidh gu tur fèin-ghluasadach “air-the-fly”. Mar as trice chan fheum dad a shuidheachadh.

    Feartan

    Tha fios againn gu bheil thu airson gum bi na locomotaibhean agad cho fìrinneach 'sa ghabhas. Mar sin, pacaich sinn an LokPilot 5 le toraidhean gnìomh. A rèir an dreach eadar-aghaidh, tha gach decoder LokPilot 5 a’ tabhann co-dhiù 10 toraidhean gnìomh leudaichte le sruth toraidh 250mA gach fear. Anns na dreachan le eadar-aghaidh PluX22 no 21MTC, tha toraidhean 4 air an cur ris gus smachd a chumail air servos no toraidhean ìre loidsig. Tha a h-uile gnìomh solais cudromach ri fhaighinn. Faodar soilleireachd gach toraidh a shuidheachadh air leth. Bidh an decoder a’ maighstireachd a’ bhrùthadh is an dealachadh fèin-ghluasadach nuair a bhios e a’ dì-cheangal airson càraidean ROCO®, Krois® agus Telex®.

    Smachd motair

    Tha smachd einnsean an LokPilot 5 air a leasachadh gu bunaiteach a-rithist. Bidh tricead gleoc PWM a ghabhas atharrachadh bho 10kHz gu 50kHz a’ dèanamh cinnteach à obrachadh air leth sàmhach, gu sònraichte le motaran clag-armature - tha an “hum” àbhaisteach mar rud san àm a dh’ fhalbh. Faodar an smachd luchdan a-nis atharrachadh gu cùisean duilich le suas ri 10 CVan. Tha an gnìomh sònraichte "Autotune" a’ toirt comas don decoder a bhith air a chalabadh gu fèin-ghluasadach chun motair. Le suas ri 1.5A sruth motair, tha an decoder LokPilot 5 a’ toirt seachad sùgh gu leòr eadhon airson motaran nas sine.

    Sàbhailteachd obrachaidh

    Faodar

    A PowerPack a cheangal ris an LokPilot 5 gus earrannan rèile salach a dhùnadh agus tha e air a ghabhail a-steach anns a h-uile locos cruinn mar ìre àbhaisteach

    Dìon

    Gu dearbh, tha a h-uile toradh gnìomh agus toradh motair air an dìon bho cus luchd. Tha sinn airson 's gun còrd an dì-chòdachadh agad cho fada 's as urrainn dhut.


Customer Reviews

Based on 21 reviews
71%
(15)
14%
(3)
14%
(3)
0%
(0)
0%
(0)
L
Lyle T.
FITS, WORKS, ABILITY TO GROW

This review is in response to my initial review of the Andrew Barclay and the difficulties of installing a DCC decoder. Andrew of Accurascale responded to that review and promptly restocked this decoder. The outstanding customer support he provided has led to my ability to run this loco in the way that it was designed to do. It is an outstanding performer.

This decoder not only fits with room to spare, but also provides solder points to enable additional features. I added a TCS KA-N1 stay alive, which is small enough to fit below the decoder and may also add lighting features to the available auxiliary pads. It runs the loco smoothly.

The size of this decoder makes it easier to install into the Andrew Barclay (AB) without too much fuss. The interferences on the AB make it too precarious to have to try to fight a decoder in, as I was doing. This time, there were no issues (experience helped too!).

R
Russell H.
Easy to fit

Decoder was easy to fit into socket and works well.

G
Gordon M.

They work fine and do the job

B
Bob F.
Not yet convinced

Decoder very easy to fit once the body removed and the change of code from the standard 003 was done without issue. However, the engine does not run very well, indeed it is substandard The decoder is perhaps not the problem but the situation as it has presented itself not ideal.

A
A.L.
First venture into DCC

Fitting the chip was no problem - once located the instructions on the LokPilot web site (no printed instructions included). All works fine on 12v analogue. Not yet tried on DCC as this is the first step in my journey to DCC; so will need to invest in a command station and a cab next.

J
Jacob B.
Decoders

Very good decoders

R
Richard

Only thing that stops a 5* review is it would be helpful for something to mark pin1. I know it wouldn't damage it putting it in reversed, but it's not good practice. Otherwise, does exactly what it should.

F
First N.D.
P class decoder

fits perfectly in the socket without being to big runs perfectly smooth after 30 mins each way would buy again

J
John B.
It's a small one.

Didn't think a Decoder could be this small well I have now, and it does its job well, this is the smallest one that I have ever fitted. Was not sure what the loose blue wire was for so left it alone, now the loco is working just great.

J
John S.
P Class 6 Pin Lokpilot Decoder

Loco didn’t run so well to start with. Set some of the motor parameters towards the standard settings and achieved much smoother running. Also set up braking function and emergency brake settings and generally messed about with function button setup. All easily done with a Srog and Decoder Pro. Lokpilots are probably amongst the best decoders for the price.

123